Sunday, August 29, 2010
Suzuki Smash Racing Look
Suzuki Smash Racing Look
The most striking change was the application of the light house Yamaha X1-R from Thailand. So much like the Transformers robot, the front of the house following with given a touch of custom lamps. Especially in the shell of the lamp, right and left wing to cover protects the bottom half of the engine looks. In addition, there is in the form of seats, covers plus side to the stern of deliberately contrived sepatbor different.
According to the Court, put the cover body X1-R in Smash quite complicated. You see, there are several components that must be cut, plus, and moved. In addition, he had to reset the handle cover mounting bolts, from front to rear.
So, shockbreker double standard models modified to Monoshock. This makes replacement of the standard swing arm turned into handmade products from the aftermarket. Great was not haphazardly done that part, as well as other sections, because the goods are used and given a little expensive custom touch.
Special exhaust, this Court guarantee a good part because her voice a little more good and able to increase power. Apart from good to hear, according to Agung, exhaust was fitted to these changes. He predicts, the concept of combined racing look would be noticeable color trends.
YAMAHA JUPITER MX BODY CUSTOM
Luxury body customized of yamaha jupiter mx
Regarding the bike, Made Ambara the M1 service station manager also said, "This motor is Jupiter MX in 2006 that I kastem with the concept of the body custom elegant minimalist," he explained. Although no extreme changes in engine, body looks great this is like a magnet capable of attracting more pairs of eyes to glance at him. Details of the front legs alone thick gold nuances like the chrome Gazi Fork Up Side Down and discs and 4 piston Kitaco KALIPER. To master brake and Tromol still using the original model.
Continue to the rear legs, the changes apparent in the arm swing changes that also kastem model. Additionally there is the change in suspension using Gazi, Posh discs, 4 piston Kitaco KALIPER, and also the master brake custom version. Everything seemed to chime neatly with details from the body frame, front mask, fairing, the stern and the hood is the fruit Ambara Made creations under the label M1. As already mentioned above, although no change is in the machine, remove the motor tract is also redesigned custom model.
For variations on this bike can be seen clearly in the use of X-1R handlebar, rear lights and sign Mio. For the gas pedal and Footstep, Made Ambara choose compact model output leading manufacturer of Yoshimura parts.
Prominent in the color, to paint and clear in the bike was handed over entirely to the shop wearing chrome Malik Bali william serwin products plus gold chrome on the outside. "Long processing this bike takes a month with difficulties, especially in sectors where we kastem body tries to tie fiber with plastic," he reveals about the processing time and difficulty processing these motors.
A row of these features are instantly made him a motor home so the best Denpasar, especially in the category of modification and the coolest duck blink-blink. Closing the conversation, the program reveals a friendly man on first impressions and expectations, "I am very proud and happy for this victory and I hope it'll be more motor worked the front with a better one than now".
MODIFIKASI JUPITER MX 2011
Yamaha Jupiter MX is one type of duck sport present in Indonesia. Tampangnya the sporty 135 cc engine and the use of water cooling (radiator) and also made a clutch type motor duck the behavior at this time.
Tampangnya a sporty can still be modified or amended in order to appear more sporty I take some pictures from some website about modifications Jupiter MX
with the addition of the wing and the engine down jupiter mx more sporty and is paired jupiter z light to the front and without lights on.
Mercedes Arrow Is A Lightweight Two-Seater Vehicle Gives You The Feeling Of Sliding With A Bobsleigh
Mercedes Arrow has been designed to draw a comparison with other recreational vehicles such as motorcycles, jetskis or personalized aircraft. This stunning vehicle gives its passengers the ride of their life. The bobsleigh shaped body, the lightweight materials and the sporty look enable it to shoot through heavy traffic like an arrow from a bow. This experience can only be enjoyed by two passengers, their seats are placed one in front of another. One of the stunning features this futuristic car has, is that it combines TANDEM with MAGLEV technology to take sharp corners. This innovative feature allows the body of the car to tilt left and right when the car is taking corners, thus minimizing the wheels tilt angle. There is an almost non-existing chance for the vehicle to slide out of control. Due to the slim body, the wheels cover the same space of tarmac, just as a contemporary car, eliminating the risk of the car flipping over. The designer, Felipe Palermo, found inspiration in the old Silver Arrows, the SLR McLaren and the 1954 Gull-Wing.
Designer : Felipe Nogueria Palermo
The whole design and idea put this concept automotive in a near future, where people won’t be using cars anymore. A future where the whole transport itself will be based on rail systems. Felipe’s Arrow vehicle is designed for fun in the weekends, a recreational vehicle. The air intake placed in the rear of the car, over the last passenger, reminds us that the whole vehicle is based on Mercedes’ racing history and its super-cars. The airintake is also a starting point for the side bars, which strengthens the body and hold between them a small wind shield in front of the driver. Mercedes Arrow will be equipped with the next generation tire technology. They will have the ability to never wear out, the driver will be able to re-inject them with rubber and take the car for a spin, again. Felipe Palermo has applied everything he has learned at the IED, where he graduated in Car Design in 2007. He also has a post degree in Transportation Design and Industrial Design at FAAP, and is currently working at Mercedes-Benz Design Studio in Brazil.
Peugeot Modif
Automobile industry has seen various changes in past few years. Trend for compact hybrid cars is at its peak now a days. Several new designs are shaped every day and there is lot more to come.
Peugeot Modif is a fabulous design for a hybrid car that will be very successful in small towns and tight places. It has a two tone color scheme and the center of this is the large rubber tube-like center shaft that allows the car to squeeze up to 88 centimeters and also provides the front of the car with flexibility to swivel from side to side 18.5 degrees for better drive.
I liked the design as it is different from traditional designs, it features white tires and large black chrome wheels with each tire having six special pads holding sensors to intimate the driver for adjustment of car according to road conditions. Inside each massive wheel is a powerful hydrogen hybrid engine. 80% of the material used to make is renewable, the a rubber element in the front part houses the oil, water and CPU.
The cockpit of the car is covered by a large bubble top one-piece window that provides the passenger and the driver with an unobstructed view up to 360 degrees. Rare view cameras on both sides constantly provide with the status of the road behind on a screen embedded on the dashboard. It also features a high-discharge red led emergency light on the top for you to cherish a V.I.P. feeling. The exhaust pipe is positioned in the center that only emits water.
Peugeot Modif
Automobile industry has seen various changes in past few years. Trend for compact hybrid cars is at its peak now a days. Several new designs are shaped every day and there is lot more to come.
Peugeot Modif is a fabulous design for a hybrid car that will be very successful in small towns and tight places. It has a two tone color scheme and the center of this is the large rubber tube-like center shaft that allows the car to squeeze up to 88 centimeters and also provides the front of the car with flexibility to swivel from side to side 18.5 degrees for better drive.
I liked the design as it is different from traditional designs, it features white tires and large black chrome wheels with each tire having six special pads holding sensors to intimate the driver for adjustment of car according to road conditions. Inside each massive wheel is a powerful hydrogen hybrid engine. 80% of the material used to make is renewable, the a rubber element in the front part houses the oil, water and CPU. The cockpit of the car is covered by a large bubble top one-piece window that provides the passenger and the driver with an unobstructed view up to 360 degrees. Rare view cameras on both sides constantly provide with the status of the road behind on a screen embedded on the dashboard. It also features a high-discharge red led emergency light on the top for you to cherish a V.I.P. feeling. The exhaust pipe is positioned in the center that only emits water.
Saturday, August 28, 2010
Modification Yamaha Jupiter MX 135LC
Modification Yamaha Jupiter MX 135LC
Jupiter MX 135LC character somewhat different from the common duck. Vertical engine and body shapes are cool, so by default, with a little touch, the look is so ciamik Yamaha duck. In the hands of the builder Topo Goedhel Atmojo Tauco Custom (TC), MX body become more muscular and sinewy.
Topo accidentally change the MX tongkrongan so very special because the owner came all the way from Bandung. "So, should dibikinkan something special," says modifier, master TC in Kebagusan, Jaksel.
Here, position the tank moved forward and created separate seat. The design is quite unique. Sector so impressed sturdy tanks, pipes made tralis who applied from Ducati. Additional framework that, according to Topo, not just decoration. Function as the holder of the tank.
Machine model of an upright to provide more flexibility when designing the cover. All parts can be said is new and customizing results using 0.8 mm galvanized plate material.
Try lyrics swing arm (swing arm). This homemade because it is the dimension and the model should follow the body shape. If a unique shape like this, hard to match them with the arm swing variations.
Carefulness in the selection of front and rear lights deserve a thumbs up. "Aura sports were in line with Suzuki Arashi 125 lights that do have moge-style model," said Topo
modification motorcycle Honda
modification motorcycle Honda
motorcycle with air suspension or air suspension (water case) is indeed rare. I already have experience, Cak-greeting friends Yanuar War-it was not hard on them. Few obstacles appear on the procurement of materials.
Shock absorbers (shock), hydraulics, for example, obtained at a flea market, and hunting items at flea markets have to be patient. "Shock was a former machine factory," said Cak War. In addition to shock, and other materials for stringing sus water, namely the compressor which serves to create the air pressure on sokbreker.
Compressor is needed is not too large. The reason is, that part will be placed in front of the saddle (centerbone). Cak War finally chose Suzuki Carry air conditioning compressor. After all ingredients completely, then the installation done.
Here, the compressor is changed as a function of wind-driven compressor with a belt that is connected to the magnet machines. So, when the engine of life, participated compressor to fill air tube placed under the seat. Low High shock absorbers arranged through the switch.
Views motor also changed. When viewed frontally from the front, it resembles the Honda Beat, while the body sides and rear of the Honda Revo. Only, as the road, the rider a little hassle if wearing pants fabric. Then, the foot must also continue because there is a compressor
Subscribe to:
Posts (Atom)
